XFree86$B$N%P!<%8%g%s%"%C%W$NJ}K!(B
$B!J$H$$$&$+(BXFree86-3.3.2$B$N%$%s%9%H!<%k$NJ}K!!K(B

$B!!$3$l$O(BXFree86 3.3.2$B$N%j%j!<%9%N!<%H!J(BRELNOTES$B!K$+$i!$(BXFree86 3.3.2$B$N(Bsource$B$r(B
$B$H$C$F$-$F(Bcompile$B$9$k$N$G$O$J$/!$(Bbinary$B%-%C%H!J(Brpm$B$K$O$J$C$F$X$s$1$I!K$r$H$C$F$-(B
$B$F%$%s%9%H!<%k$9$k$d$jJ}$,=q$$$F$"$kItJ,$rH4?h$7$?$b$N!#(Bmake$B$J$s$>0l@Z;H$o$s$o$1(B
$B$d$73Z$J$b$s$d$G!#$A$J$_$K(BREADME.Linux$B$H$$$&J8=q$b$"$k$1$I!$H]DjE*$J>pJs$b$J$$$1(B
$B$I%$%s%9%H!<%k:n6H$K0UL#$N$"$k>pJs$b$J$$!#$=$&$=$&!$$3$l$O0lHLO@$d$1$I:n6H3+;OA0(B
$B$K(B
$B!!!!(Bscript -a x332.log1
$B$J$I$H$7$F$*$$$F:n6H$N(Blog$B$r$H$C$F$*$/$HJXMx$d$G!#:n6H$,=*$o$C$?$i(Bexit$B$G(Bscript$B$r(B
$B=*$o$k!#(B


$B)!05=L(Bbinary$B%U%!%$%k$r$H$C$F$/$k!JCV$->l=j$O)$$r;2>H$N$3$H!K(B
$B!J0lHL%f!<%6!<$G!K(B
4.  Installing the XFree86 3.3.2 Release

The XFree86 3.3.2 binaries are distributed as both a full release and as an
upgrade to XFree86 3.3.1.

NOTE: the X servers are no longer installed setuid root.  If you are starting
your X servers with startx/xinit, or something similar, you will need a copy of
the setuid Xwrapper, and an updated xinit.  These can be found in X332upd.tgz
for those upgrading from 3.3.1, and in X332bin.tgz for those doing a full
install.
$B!!!!!!!!(B************************************************
The following are required for all new installations or upgrades from versions
prior to 3.3.1:


	  preinst.sh	  Pre-installation script
	  postinst.sh	  Post-installation script
	  extract	  XFree86 extraction utility
	  X332bin.tgz	  Clients, run-time libs, and app-defaults files
	  X332doc.tgz	  Documentation
	  X332fnts.tgz	  75dpi, misc and PEX fonts
	  X332lib.tgz	  Data files required at run-time
	  X332man.tgz	  Manual pages
	  X332set.tgz	  XF86Setup utility
	  X332VG16.tgz	  16 colour VGA server (XF86Setup needs this server)
$B!!!!!!!!!!!!!!!!!JI,MW$J%U%!%$%k$K$D$$$F$O:G8e$K$D$1$?!Vd*DI5-!W$r;2>H$N$3$H!K(B
$B!!!!!!!!(B************************************************
NOTE: The bitmap fonts distributed with this release are compressed using gzip
rather than compress.  This means that you will probably want to remove the old
versions (after backing them up).  The Xservers and font server in releases
prior to 3.2A cannot read gzipped fonts, so keep a copy of the old fonts if you
wish to run older servers.

The following X servers are for PC/AT based hardware (i.e., typical Intel ix86
based PCs).  Choose at least one which matches your hardware, as well as the
VGA16 server.  The VGA16 server is required by the new configuration utility
(XF86Setup).


	  X3328514.tgz	  8514/A server
	  X332AGX.tgz	  AGX server
	  X332I128.tgz	  I128 server
	  X332Ma32.tgz	  Mach 32 server
	  X332Ma64.tgz	  Mach 64 server
	  X332Ma8.tgz	  Mach 8 server
	  X332Mono.tgz	  Mono server
	  X332P9K.tgz	  P9000 server
	  X332S3.tgz	  S3 server
	  X332S3V.tgz	  old S3 ViRGE server (please use SVGA server)
	  X332SVGA.tgz	  SVGA server
	  X332VG16.tgz	  16 colour VGA server (XF86Setup needs this server)
	  X332W32.tgz	  ET4000/W32, ET6000 server
************************************************

$B)":#$^$GF~$C$F$$$?(BX$B$N%P%C%/%"%C%W$r$H$C$F$*$/!J0lHL%f!<%6!<$G!K!!!!!!!!(B
If you already have a version of XFree86 installed, MAKE A BACKUP OF /usr/X11R6
BEFORE DOING ANYTHING ELSE.  The standard installation procedure will overwrite
your existing version of XFree86.

$B)#$J$1$l$P(B/usr/X11R6$B$H$$$&%G%#%l%/%H%j$r:n$k!J(BX$B$,F~$C$H$?$s$J$i$"$k!K(B
$B!J0lHL%f!<%6!<$G!K(B
If you are installing from scratch, create a directory called /usr/X11R6, then
extract the required .tgz files.  If you don't have enough space in /usr for
this, create a directory elsewhere and create a symbolic link to it.  E.g., if
you create a directory in /home:

	  mkdir /home/X11R6
	  ln -s /home/X11R6 /usr

The next step is to run the pre-installation script.  This script makes some
preliminary checks of your system.  For some OSs, it may tell you to install
new versions of some system components before proceeding with the installation.
This script may also remove some outdated files and symbolic links from a
previous installation that could cause problems.

$B)$$H$C$F$-$?05=L(Bbinary$B%U%!%$%k$r(B/var/tmp$B$K$*$/!J0lHL%f!<%6!<$G!K(B
For the purposes of these installation instructions, it is assumed that you
have downloaded all the files to the /var/tmp directory.  If you've put them in
another directory, that's fine -- just replace all occurrences of ``/var/tmp''
with the name of that directory.
$B!!<B$O$"$H$NF~NO$G(B/var/tmp$B$r(B/tmp$B$HCV$-49$($l$PCV$->l=j$O(B/tmp$B$G$b$h$$!#$H$$$&$+$"(B
$B$H$NF~NO$r$-$A$s$HCV$-49$($5$($9$l$P$$$C$?$sCV$/>l=j$O$I$3$G$b$h$$!#MFNL$KM>M5$,(B
$B$"$C$F=*$o$C$?$"$H%U%!%$%k!$%G%#%l%/%H%j$r>C$7$d$9$$>l=j$,$h$$!#(B

$B)%(Bpre-installation script$B$r<B9T$9$k!J0lHL%f!<%6!<$G!K(B
To run the pre-installation script, go to /usr/X11R6 and run it:

	  cd /usr/X11R6
	  sh /var/tmp/preinst.sh

$B)&$H$C$F$-$?(Bexecute$B$r;H$C$F05=L(Bbinary$B%U%!%$%k$rE83+$9$k(B
$B!J$3$NESCf$G(Broot$B$K$J$k!K(B
The next step is to make the installation utility executable.  To do this, make
sure the `extract' file is in the same directory as all the X332*.tgz files,
and run the following from that directory:

	  chmod 755 extract$B!!!J$3$l$O0lHL%f!<%6!<$G!K(B

The installation utility ``extract'' is used to unpack the .tgz files that make
up the XFree86 distribution.  The .tgz files are gzipped tar files.  However,
``tar'' in its standard form on most OSs is not well-suited to the task of
installing XFree86.  The extract utility is a modified version of GNU tar 1.12
built with the options required to make it suitable for installing XFree86.
The source for extract is available from the same place you got the XFree86
distribution.

It is strongly recommended that you use the provided extract utility to unpack
the XFree86 distribution.  If you choose to ignore this and use something else,
we don't want to hear from you if you run into problems.  It is also important
that you do not rename the extract utility.  If renamed, it behaves just like
the normal GNU tar.

To extract the XFree86 binaries, run the following as root:

	  cd /usr/X11R6
	  /var/tmp/extract /var/tmp/X332*.tgz$B!!!J$3$l$O(Broot$B$G!K(B

$B)'(Bpostinst.sh$B$r<B9T$9$k!J(Broot$B$G!K(B
Once the required .tgz files have been extracted, run the post installation
script:

	  cd /usr/X11R6
	  sh /var/tmp/postinst.sh

For OSs which use ldconfig, you may need to run ldconfig or reboot to complete
the installation.  The postinst.sh script should run ldconfig correctly for you
if you are using Linux, FreeBSD, NetBSD or OpenBSD.  For other OSs that use
ldconfig, check how it normally gets run at boot time.


$Bd*DI5-(B
$B!!(Bbinary$B%U%!%$%k$O(B
$B!!!!(Bftp://ftp.iij.ad.jp/pub/X/X/XFree86/XFree86/3.3.2/binaries/Linux-ix86/
$B$+$i$H$C$F$-$?!#$3$N(BRENOTES$B$KI,MW$@$H=q$$$F$"$k$b$N(B
postinst.sh
preinst.sh
extract
X332bin.tgz
X332doc.tgz
X332fnts.tgz
X332lib.tgz
X332man.tgz
X332set.tgz
X332SVGA.tgz
X332VG16.tgz
$B$NB>$K!$0J2<$N$b$N$bI,MW$HH=CG$7$F$H$C$F$-$?!#(B
X332cfg.tgz
X332f100.tgz
X332fcyr.tgz
X332fnon.tgz
X332fscl.tgz
X332fsrv.tgz
X332html.tgz
X332jdoc.tgz
X332jset.tgz
X332lkit.tgz
X332nest.tgz
X332prog.tgz
X332prt.tgz
X332ps.tgz
X332upd.tgz
X332vfb.tgz
$B0J2<$N(Bbinary$B%U%!%$%k$O(BPC98$B4X78$N$b$N$HH=CG$7$F$H$C$F$3$J$+$C$?!#(B
X3329set.tgz
X332lk98.tgz
$BH=CG$O(Bbinary$B%U%!%$%k$HF1$8>l=j$K$"$k(BFILES$B$H$$$&%U%!%$%k$NCf?H$r8+$F9T$C$?!#$3$N(B
FILES$B$NCf$K$O(Bbinary$B%U%!%$%k$rE83+$7$?%U%!%$%kL>$N0lMw$,%:%i!<%C$H=q$$$F$"$k$N$G(B
$BBgBNJ,$+$k!#%Q%9L>$K(Bfont$B$H$$$&%G%#%l%/%H%j$,=P$F$-$?$i%U%)%s%H4X78$d$J!$$H$+!$(B
drivers98$B$H$$$&$N$,=P$F$-$?$i(BPC98$B4X78$d$J!$$H$+!#(B